Our F.A.B. Conversion specialists can convert any type of van. Full or part conversions. Creating a conversion suits you. Take a look at our projects completed below for some inspiration.    

Conversions can include : 
Sliding or Fixed windows 
Pop tops with a range of canvases. Scenic and standard options. 
Kitchen and storage units 
A range of Seat beds 
USB Ports 
Leisure Battery 
Swivel seats 
Sound deadening 
Solar panels 
Electric hook up 
Sink and hob units 
Rear heater 
A range of awnings 
Internal table 
Blinds and curtains 
Flooring and seat bed tracks 
We can convert to your budget and make bespoke to your needs.  
Other enhancements available also. 
Convert to your budget
Sliding or Fixed windows
Flooring and seat bed tracks
Give us call today to discuss your options on 01275 874578 
Project 1 – VW Transporter 
Here is an example of a bespoke conversion for a customer who brought a previously converted VW Transporter. They were not happy with the set up and wanted to change to suit them better. We stripped the vehicle fully to start from scratch. Keeping some of the internal units to reuse helping to keep cost down to meet their budget. We fully insulated and carpeted the vehicle. Fitted lighting and USB ports, altered the units and layout. We added a new worktop and kitchen extra storage units. The customer then finished off on their own with new cushions and décor. 
Before pictures 
After pictures 
New worktop and kitchen units
Fully insulated and carpeted
Lighting and USB ports
Project 3 – Ford - FAB Camper Rentals Conversion 
Here we converted our own vehicles for our own Camper rentals department FAB Camper Rentals. 
Fully fitted Pop Top, Kitchen and storage system, gas hob and sink, gas safety box and plumbing, rail bed seat, fully insulated and carpeted, swivel front double seat, new floor and vinyl, fire extinguisher and smoke alarm, internal blinds, and curtains. All fitted to a high standard and gas and electric safety checks complete. 
Fully fitted Pop Top
Kitchen and storage system
Fitted to a high standard
Project 4 - Ford Connect 
We're excited about our latest camper conversion, the customer of this Ford Connect is going for a bespoke rustic look. We are very pleased we were able to achieve this meetig his budget. Amazing what you can fit into such a small vehicle.  
This conversion includes: 
USB ports 
Tongue and Groove roof lining 
Burnt rustic varnished units 
matching pullout bed with storage 
New floor and carpet 
Surf board roof hook tie system 
Cab divider curtain 
Ford Connect conversion
Bespoke rustic look
Project 5 - Ford Camper part work conversion 
We have Ford Custom which has already had a pop top fitted and the customer has requested we do the remaining conversion for them.  
We have fitted: 
Ford original leather seats 
New Floor and vinyl 
Carpeting throughout  
Solar panel 
Split charger 
PROJECT 6 - Ford Custom Day Van 
Completed project Ford Custom Day Van conversion.  
Being fitted with: 
leather seats 
rubber floor 
bed frame 
electric hook up  
USB ports 
Project 7 - VW Carfter 
The Fitters are working on this VW Crafter today the conversion includes 
Tinted windows 
Insulation and Sound Deadening 
Carpeting sides 
New floor and Carpet 
Raised Bed frame with carpeted bed board 
1 Ford Seat 
Pull out bed 
Roof light vent with blind 
Window blinds 
Leisure battery and split charger 
Lighting and USB Ports 
Project 8 - Ford Custom 
Ford Custom Bespoke conversion: 
Full lining and roof lining 
Electric Hookup and 3 pin points 
Half Bulkhead with electric points 
Rear bed with rear access storage 
Storage box 
Project 9 - Ford Custom 
Ford Transit custom: 
This vehcile aleady had a pop top fitted so we completed the work as cstomer required. 
We fitted: 
Leisure Battery, split charger and solar panel with control panel 
Roof bed board on gas struts and mattress 
Side steps 
Rear barn door windows 
Floor and vinyl 
Custom made rear bed 
Refit seats 
Projext 10 - Ford Transit High Rise Bed 
Ford Transit with height adjustable high rise bed, Full widt Rock and roll and tongue and groove panelling 
Project 11 - Ford Custom Camper 
Ford Custom Camper conversion  
Conversion details – 
Insulation and carpeting to sides and door panels inc and ply required 
Carpeted roof lining 
2 x opening privacy side windows 
2 x window blinds to side windows 
Half height carpeted bulkhead behind driver and passenger seats 
Cab divide curtain 
New floor and vinyl 
Rear and 2 side door Ford trim panels 
Ctek split charger, Solar panel, AGM 800W/H Low height leisure battery and control panel 
240 hook up and 4 plug sockets 
6 x 12v cigar sockets 
4 x LED roof lights 
Smart bed Evolution R ¾ bed on 1800mm length rails with removable headrests 
Storage cupboard under seat 
Project 12 Mercedes Vito R & R Bed 
Vito fitted with Rock and Roll seat 
Project 13 - MAN TGE Camper Conversion 
MAN TGE Bespoke conversion including
• Remove bulkhead. 
• sound deadening and insulation to sides and door internals. 
• new floor and vinyl 
• ply lining 
• carpeting to sides and door ply panels 
• roof lining plus carpeted. 
• LED lighting 
• double USB port 
• 2 x Side Slide opening privacy windows. 
• swivel base for double passenger seat 
• 3 x Ford OME removable and reclining seats in cloth 
• Fold out from sides bed frame (metal) with wooden bed board. 
• Maxx fan Deluxe 400x400 Rooflight, Smoke with Maxx Shade - Blind with LED Light for Maxx fan Vents 
• Standard 2nd roof vent 
• AIRO diesel Night heater with fuel pick up. 
• CTEC split charger and AGM 800W/H Low height leisure battery and control panel. Leisure battery to be positioned under bonnet.  
• Van Gear Campervan Fridge- kitchen Pod 39i plus adapted to make removable. 
• Removeable carpets in front of rear seats not a problem. 
• 2 x Single side Cargo Load restraint on both sides in rear section 
• storage cupboards added to rear bedframe section 
• table storing brackets to rear door 
• blinds to two side windows 
• 1000w inverter with two 3 pin sockets 
• custom made high quality mattresses with cool plus covers